IH FARMALL PERFORMANCE PARTS

M thru 450 Farmall pin bushing - Stock Replacement

1.500" long for 1.000" diameter wrist pin

+.005 oversize OD available

 

 

 

M thru 450 Farmall pin bushing adapter

1.250" and 1.500" lengths available

adapts to 1.000" wrist pin diameter

(for rods originally using 1.312" pins)

 

H thru 450 Farmall 

Spin On Oil Filter Base

 

 

 

 

IH D360 - DT466 rocker shaft end supports

 

Made from heat treated alloy steel. Shaft hole is precision honed for size.

Support also has an oil feed groove in the base to supply lube to the pushrod like the OE stand does.

Price $275 pair

 

Farmall "H" "M" and 301

Offset Camshaft Key Set

FARMALL Large Bore Head Gaskets & Stud Kits

 

 

 

 

DT-466 Timing Cover with ignition, adapters,  accessories, and related fasteners

(with ears to set on stock frame rails)

DT-466 Damper pully and drive.jpg (888363 bytes) DT-466 Oil Pump and Adapters.jpg (867990 bytes) DT-466 distributer and crank trigger.jpg (618264 bytes)

 

  9 Bolt Weld on Hubs click on links to view Hub page

                  Currently Available for 

   H & M Farmall         60 & 70 John Deere    

 

Main stud girdle for IH 221-263 301

Also Available for Oliver 88

Heavy duty 1/4 steel cam thrust plate and two 1pc captive Torrington needle thrust bearings for IH 221-263-301 (machining of cam and cam gear required)

 

1/4 inch oil pump spacer for IH 221-263 301 stroker crank clearancing

 

 

Remote oil filter adaptor flange 1/2npt for IH 221-263 301

 

Exhaust flange for IH 221-263 301 (806 manifold)

 

 

Exhaust block off plate for IH 221-263 301

 

     

CONNECTING RODS

 

M Farmall

connecting rod is 1.125" wide with a 2.200" rod journal, a .990" wrist pin. available in 10.300" length, uses Big Block Chevy rod bearing with a 1/8" radius in crankshaft

 

H Farmall

connecting rod is .980" wide with a 2.000" rod journal, a .927" wrist pin. available in 8.500" length, uses 2.5 Pontiac rod bearing with a 1/8" radius in crankshaft

 

301 Farmall

connecting rod is .940" wide with a 2.100" rod journal, a .927" wrist pin. available in 7.350" length, uses 200 V-6 Chevy rod bearing with a 1/8" radius in crankshaft

 

NOTE: 

Above rods with mentioned bearings and radiuses do not require bearing modifications.

 

 

ROCKERS

IH Red Diamond 501

 

IH-DT 466  

 

IH-FARMALL A,B&C

 

IH-FARMALL  H Thru 450

 

  IH FARMALL W9  

 

IH FARMALL - 460 thru 560

 

IH 345 V8

 

MURPHY'S MOTOR SERVICE

311 B East Hwy 00

Hallsville, MO 65255

 

Call: 573-696-3655

 

E-mail: jeff@murphysmotorservice.com